RC-Design
Items 1 - 10 of 10
The Epoxy Gelcoat Resinpal 2404-H is a whitish colored gelcoat with a brush consistency that hardens to become sticky on the air side. Resinpal 2404-H is placed in negative molds and can be colored with epoxy color pastes.
Crystal clear 2-component adhesive based on epoxy resin. Suitable for bonding fiberglass elements, wooden structures, metal and plastic fibers.
Resinpal 2401 is a high-quality epoxy resin with different hardeners. Due to the different epoxy hardeners both the processing time and the mechanical properties can be adjusted.
Release spray is ideal for close-pored surfaces and silicone molds. Low odor and silicone-free.
Release wax (liquid) is preferably used for smooth forms such as GRP forms. It is particularly suitable in combination with PVA release varnish.
PVA release agent (green) should be applied into the mold as the last release layer and can be used very well in combination with release wax (liquid) or the release paste.
Release paste can be used on both closed-pore and open-pore surfaces. It is ideally suited for use in wood, stone, plaster, GRP molds, etc.
Styrolfreier Polyester-Alu-Spachtel versetzt mit Aluminiumpigmenten.
Very easily drapable glass filament fabric with a weight of 80 g/m² in twill weave. Suitable for light components, model making and pronounced geometries. Processable with epoxy resin and polyester resin. Width: 100 cm.
Non-shifting glass filament fabric with a weight per unit area of ??80 g/m² in plain weave for flat surfaces. Suitable for filigree components, light laminates, model making and reinforcements. Processable with epoxy and polyester resin. Width: 100 cm.
Items 1 - 10 of 10